Monday, January 10, 2011

Back Panel & Misc.

Welp, got to over sized milling for new door frame parts and worked on the back panel.
The "stage" of this cabinet is so close to the bottom That I really couldn't justify making a second sliver of a panel so I made a wide bottom frame member. This doesn't make for a nice slip-tenon though so I doweled the bottom and went for slip tenons at the top joints of the frame.

Here's a neat little trick. Learned this at IP but haven't made a floating panel big enough to justify using this technique till now. I put a little 1/8" dowel in the groove of the frame and a notch in the panel. The panel will be centered on these little "pins" and have room for seasonal movement on the sides. This means that even when moving the reveals on the sides of the panel will be equal. Keen!

Aaaand poof! glued up and getting finished.
There wasn't a large selection of decent AD Maple to choose from. What I got I thought was a bit flatter sawn then I would like. I took the best section out of the center of the plank and got some interesting composition in grain pattern and think it will be nice. A little less "liney" and a little more open for a very soft looking background which should do a display cabinet good :).

I've been whittling away at the door frame members but am now over cautious about them ha. Thus I've had much more down-time than I'm used to around the shop. Starting to get stir crazy I went ahead a rough milled some lumber for the next project I've had in my head. It will be relatively quick and straight forward.
With the goal of coming up with something more "Gallery savvy" I'm looking for something smallish, simple, and less time consuming all lending to a lower price without sacrificing craftsmanship or visual interest. I'm not even going to use curves in this one! :p
I remembered the last time I got into some Oak from the commercial supplier it had crazy tension and needed to mellow out. So I milled with plenty of margin and time for it to do its thing.
More on this one later...

In addition I took some time to look at some "web design" for the gallery. The website they have now desperately needs to be updated! Will, the director of the gallery, has been kind in hearing some ideas I've had about the show space. I thought he may be interested in allowing me to try my hand at the website.
Now, I've never claimed to be a graphic/web designer... Hell, I've never even claimed to be a furniture designer. There are still bugs to be thought about and worked out but here are a couple concept screen shots.
The pics aren't all too important at the moment just defining content space.

Some of the colors will change a bit I've sure. Screen size is something that may need reworking... I have a little wide screen monitor that frames these jpgs nicely but others are different soooo... I don't know, not there yet ha.
Anywho I think it would be nice to contribute more to the gallery, and hopefully the success of the gallery. Sure I'm spending my own time on these gallery things but it stretches my brain a bit, allows me to practice other "skills", and I just may learn something too.

Tuesday, January 4, 2011

Set-backs... Grrrr

I already thought my recent work flow was choppy... Well, it got choppier.
Wood movement strikes again.
Above is a couple frame components for the back of the cabinet. The top one went a little wacky on me :/. Disappointing because it matched the bottom one so well. But hey it's not the end of the world. Milled a new piece let it settle over a couple days that I was working the part-time and got to joinery today.

Ok well since the band saw is set up with my "joinery blade" I can cut the slip tenons for the door...

... Or not. Movement strikes hard! >:/. I jointed the edges to get a better idea with what I was dealing with... Holy crap that's a lot of wind! I thought I took it easy on milling these parts! I let the wood settle for at least a day every time I cut them. Nothing seemed wrong 2.5 weeks ago.
The sides for the door also got a bit wonky... I can still use them being a little bit smaller than I wanted, or try milling new sides too, hmmm.

Well what can you do but carry on (and throw a tantrum)? Looking for a new door "crest rail". We'll see if I can find more door sides too...
I'm too aggravated to continue work in the shop today...
That and more trouble with technology and the print-shop... imagine that...
GAH! FRUSTRATED!!!

Wednesday, December 29, 2010

Just a Little Scattered

Salutations again. Oh man, Not feeling I'm getting a lot of actual woodwork done lately... Photo shoot, photo post work, post card writing/design, this little flyer, delivery to the gallery... Alas it's all part of the one-man gig. Then again, it can also be interesting.
Here's a little flyer for the up-coming "First Thursday" at the Northrup King Building. Don't know how many folk viewing this blog are near the Minneapolis area but feel welcome to come by Thursday the 6th, see the new piece &/or heckle me ha.

Just took this cabinet to the gallery today and managed a little rearranging. I was looking to group all of my stuff together hopefully in a manner conductive to the pieces themselves within the boundaries of the tight space. There is a space in the back corner of the show space I thought would be nice. There isn't much there now and it's pretty spacious. Problem is that it's all the way in back so not as attractive to foot traffic. However I would be able to lay things out in similar ways they may appear in a home.
The director suggested the entry. I suppose it's a nice gesture having the first spot people see. However I've seen that the entry way is not a place that people linger. They step in and eyes grow wide wanting to see everything. Then it is just an after-thought on the way out, minds already turned off moving on to the next studio. All that and it's a smaller space. Baby steps I guess. Hopefully I will start to sell, then later we'll see heh.

Post card front and back. The text isn't finalized. This piece seems harder for me to write about than the last two cards. Hopefully I'll have something for the 6th.

Back to the Cherry cabinet. All this touch and go on other projects does not put me in a good state for focused work ha. I suppose it hasn't been the worst timing though. Wipe finish on the carcass and work on the computer till it's time for another coat.
This time 2 coats orange shellac, 2 coast extra blond, 1 wax.

Stuck together after glue-up!
It already has a nice color to it. It should age to a nice rich tone.
At the gallery today I noticed how nicely my Cherry Pedestal is aging. At first it was so close to the AD Maple I used for the top but now there is a clear distinction. A couple months ago it looked a bit gray, monotone, and a little drab. Now it's looking deeper, redder and... sexy?
I WAS going to use some of that same Maple I have left over but it doesn't look like it's going to work :(. The two clean pieces I have are too different in color/reflection, and they are too small to make up the back panel on each own. I think Kiln dried Maple is going to be too bright, to much contrast. Maybe it'll look stellar for a month but in a year... not for this piece. I have a lead on some more Maple. Hopefully it'll work out!

Wednesday, December 22, 2010

Maple Showcase Photos

Air Dried Maple, Kwila, Kiln Dried Maple, Olive.
61"x24"x12.5"

This photo shoot seemed to go better. Perhaps I'm getting a little hang of this? Ha not crossing my fingers.
Thanks again to Craig and Carol Johnson for lending me their lights! Lights of my own are on my list I promise heh.
After last time I figured it was better to use a higher ISO level to get brighter though slightly more grainy photos than smoother dark ones. For use on the internet it is basically no visible difference in grain but in print I suspect there will be.
Haven't messed around with them too much in post but don't think they'll need much work.

All the glass in this piece presented some lighting problems as I figured it would. I tried to get around them the best I could but there's only so much I can do in a smallish cluttered space.
Also the size of this cabinet wouldn't allow me to get full landscape shots which is what my website is based on as my backdrop is too narrow :/. I'm going to have to figure something out...

The Olive has mellowed out a bit. They will get a fair amount darker but I had to get the shoot in to be able to get other things lined up to put this guy in the Gallery come Jan.

Grain whoopty-doo :).

Mmmm dovetails... heh.

Steps and curves.

And back to the first shot without contents.

Tuesday, December 21, 2010

10% to 90%?

Hey I'm back from a weekend in Milwaukee! What a craptastic drive home it was through another snow storm in rush hour. Milwaukee however has no snow in the streets... jerks ha.

Before I left I was getting some good work done.
It is said that it only takes 10% of the total time in a project to get 90% completed. Well the carcass of this wall cabinet has sure come together pretty quick.
Above pictures one of the sides being cut to final dimension. The stop-block ensures that the next side will be "exactly" the same size.


Dressing the end grain of the sides straight and true... and smooth.

Doweling jig for the carcass joints. Just milled up some sticks of 3/4" Maple (enter any other hard wood) and plotted out some dowel holes. Later it they will get a 3/16" hole at the back and a 1/8" hole in the front, I will just be using dowel center finders for that.
I have a block for the right side and a block for the left side. Temporarily nailed into the sides to hold them during operation.

Once again I have made a spacing template for joint location in the top and bottom. Once again it is tapered ever so slightly larger at the back for fitting a partition. As you my know I love these simple solutions. Make one template and it helps take out a number of small inconsistencies that may occur otherwise.

With the correct block nailed to the correct spot it's on to the drill press. Set my depth stop about 3/32-1/8" from going through and drill.

BAM! Almost a cabinet ha. Sides have been shaped with curves kicking in to the front and end grain on top and bottom to match. Before doing the shaping on the front edges I want to get some work in on the door.
These pieces still seem to be moving on me a little bit. The trip over the weekend was a good way to get away from them for a few days. Hopefully they have sorted themselves out and I can touch them up when I get back to them.

Helping me out with some door frame shaping is the newest addition to my tool wall. A larger round bottom spokeshave from LN. I've been wanting to get one of these for a while. I tend to do a good amout of curved work and don't see that changing soon. I have been making due with a flat bottom but it has become apparent that it simply doesn't do the same job. One could make a compass plane but I don't do as well with those. The curves are irregular so there is very little contact on the sole of the plane. What's the point of having a whole plane? Some people like the feel better and do better work with them. That's great, unfortunately not me heh.
I find the Veritas spoke shave to be more to the liking of my hands. More ergonomic for me with nice placements for your thumbs and fingers close up to the blade. Allows me to work more comfortably and with more control. However the Veritas round bottom shave has a heavier radius than needed which decreases the stability of the cut for me. I tried both at IP from my classmates and seem to do better with the LN's shallow radius. So now I have one. The LN is prettier than the Veritas heh.

Saturday, December 11, 2010

Snowed in and wood settling

Well hello again. Woke up today to an unpleasant sight. You're looking at about 8-10" of snow there and there is no sign of it letting up.
My plan for the day was to rough mill parts for the Cherry cabinet and go to work at the part-time for the rest of the day conveniently getting paid while I let the wood settle a bit. My car, however is going no where in this snow so I'm snowed in with nothing to do ha.
I figured I'd chat here a little bit.

Put a new blade in the band saw this morning. I love the feel of a new band cutting so smooth and easy.
This is basically the yield of the whole plank pictured yesterday. It may not look like much, and it may not be, but beyond cutting off sap there was very little waste after joining and planing the stock... perhaps 20-25% Which is pretty damn low for this kind of work!
Pictured there is the top, bottom, and sides of the carcass. Also the frame members for the door. I still need to find the back panel frame parts, mullions (pieces separating glass in the door), and the horizontal partition or "stage" as I like to call it in these kinds of cabinets. Finding the partition is going to be the trickiest. Usually I get it from the same plank as the carcass which was not possible in this case. I wont be able to find a "perfect" match but hopefully I'll find something that looks good.

I've always had mixed feelings about Cherry. It's every where. Whenever you talk to people who aren't "bit by the wood bug" they only seem to care or know about Oak, and Cherry. I've seen a lot of "bad" work in Cherry. A lot of misused perhaps abused Cherry. So many woodworkers go on and on about how great it is (many of whom are the misusers). It's gratuitous.
All this gives me poor connotations with the wood. However Cherry IS nice and CAN be used to much success. It's relatively light and sturdy. It works very well and has little blunting effect. It has potential for a variety of finishing choices. It has lovely depth of color (when not stained [as it should be ;) ] ). The wood even smells a lovely soft sweetness. The trees themselves are romantic sights in bloom and bearing fruit.
It seems a lot of these connections are lost in much of the work I see in Cherry. I would love for this piece to come together and for an audience to be able to sense these things, the "nature" of the material. Perhaps, if it is a success, they may wonder why other work in Cherry isn't like this? ... That may be a stretch but it is nice to think about and perhaps wish or strive for.

I have a sudden craving for some cherry lambic.

Friday, December 10, 2010

Moving On Again - Cherry Display Cabinet

Now that the usual trouble with glass is out of the way (this time the shelf edges were not polished) I can move on from the showcase until I'm ready for photos.
Yay! My paper work finally has a home beyond a drawer in my room ha.

I've been wanting to frame these since I came back (May 2009) but have been so busy with other work.
MCTC, IP, and my IP class photo :). I still want to make a little shelf for my JK Plane but will leave that for next break maybe.
Love those little steps, I can't get away from them now.

I already can't remember the grass and the cool fall nights. The snow and cold is a familiarity I wish to depart from. Shivering mornings combated by the dry heat of a small electric radiator. I need to adjust the drawers in the Maple Showcase as they swelled just a little being moved upstairs.

Next up is a wall hung display cabinet in AD Cherry!
For those in the "Krenov circle" this kind of cabinet is not new. A form so simple and elegant is bound to be come to by a variety of people independently, and one may expect, be repeated.
I love this form and have been waiting for a good time to build one. The specifics and details will vary with the voices of the lumber and maker. It is not and perhaps cannot be an exact "replica" of an existing piece.
The Cherry lumber has already put in a request: smallish. This is the best plank of cherry out of a small flitch and still has some defects to be weary of. I think I will go for about 1/2" bigger in height and width than the mock-up.

Also this time I'll be using a French Cleat to hang the cabinet due to the properties of the wall it is to go on. A cleat is easy enough but what gets to me a bit is the space needed in the back of the cabinet. One might say that an extra 3/8" or so is no big deal. Sure, but with a small cabinet that amount can be somewhat significant in a visual sense. I'm pretty into stripping down to "essential" space and size. The problem is that the "show space" (interior) of the cabinet may feel slightly small if I make the carcass the size I see fit, or the carcass might seem a little deep to get the show space I feel good with.
Currently I'm siding on the show space side. Probably because of a drive for function I tend to have.